Fortress V2 Inflatable Air Canvas Tent Detailed Features
LAYOUT | The Fortress features our most popular tent layout. Rooms at one end of the tent offer privacy and can be divided in two by attaching the included curtain. Once divided, each room has its own internal door, rear window and 3-way side window. The sides of the main living area can be fully opened to create another entry/exit or to allow for maximum airflow. The front wall of the central living area completely zips open creating a seamless transition between the indoor and outdoor living areas of the tent.
VENTILATION | The Fortress is constructed from durable and breathable Poly Cotton Canvas. This canvas creates an environment that is cooler during the day and warmer at night than polyester fabrics. To further increase air circulation throughout your tent, the Fortress features a large number of ventilation options. All windows in the tent can be opened from the inside, allowing complete control over privacy and ventilation from within the tent. The rear bedroom window features gusseted window covers that allow for protected airflow in any weather when guyed out.
CONTENTS | Tent body, Single action pump (pump hose, valve adaptor, pressure release valve, pressure gauge), Peg bag (4x 11mm Crinkle cut pegs, 38x 8mm Crinkle cut pegs, 5mm guy ropes), Awning Pole Bag (2x Gold passivated Awning poles, 2x 5mm Guy Ropes), Repair Kit (Fabric patches, spare isolation tap, tap wrench, zip ties), Instruction manual, 2x webbing compression straps
Fortress V2 Inflatable Air Canvas Tent Specs
- 4
- 8
- 12
- 2-3
- 240cm / 94.5in
- 240cm / 94.5in
- Oversized inflatable airsystem tubes
- 220/340gsm polycotton canvas (walls)
- 340gsm polycotton canvas (roof)
- 1,200mm (improves with age)
- UPF 50
- 14×14, 220gsm PE
- 9
See more specs
Fortress V2 Inflatable Air Canvas Tent Features
- Cabin design
- Deflate taps
- External inflation points
- Free standing design
- Guide straps
- Inflatable air frame
- Isolation air lock taps
- Multiple deflation points
- Oversize tubes
- Single point inflation
- Breathable polycotton canvas
- Durable 220gsm floor
- Lap felled seams
- Natural fibre blend
- Torrential rain tested
- 340gsm strength panels
- Integrated air frame
- Sewn in ground sheet
- Extended awning
- Full front opening
- Full head height
- Full side openings
- Internal living area
- Open plan layout
- Sewn in internal wall
- 3 way windows
- Adjusted internally
- Fibre coated mesh
- Full length windows
- Zip around internal window covers
- Rear external window covers
- Tinted PVC
- Waterproof window covers
- Front to rear airflow
- Gusseted rear window
- Large mesh windows
- Side to side airflow
- Clip out dividing curtain included
- Direct window access
- Dividing curtain attachments
- Roll away D doors (2)
- 360° fold away main door
- Central roll back door toggles
- Door locks
- Twin layer main door
- All weather access
- Awning valance panels
- Clothesline attachment rings
- Guide Straps
- Bedroom area LRS
- Living area LRS
- Aluminium shaft
- Pressure gauge
- Pressure release valve
- Adjustable peg loops
- Steel D ring peg points
See more features
Fortress V2 Inflatable Air Canvas Tent Care And Protection
-
• Ensure guy ropes are out at all times during use.
• Never pack your tent away wet. If you must take your tent down when wet, ensure that it is dried completely as soon as possible to prevent mildew from forming.
• If mildew does form on your tent, wash off with warm water and a soft brush to prevent further growth, do not use soap or detergents.
• Do not use an open flame inside your tent.
• It is important that lower vents are opened at all times to reduce condensation. During humid or damp conditions, it is recommended that the waterproof door covers are opened to expose the mesh layer, enabling additional airflow throughout your tent.
• Do not use open-cell foam mats directly on the tent floor. This can cause condensation between the mat and floor and if not dried out, can lead to mildew from forming.
- Imported
Reviews
There are no reviews yet.